AI Alerts
AI DrillerAI Driller's real-time notifications for anti-collision, lease boundaries, dysfunctions, washouts, stuck pipe, kicks and SOP deviations.
130 of 130 terms
AI Driller's real-time notifications for anti-collision, lease boundaries, dysfunctions, washouts, stuck pipe, kicks and SOP deviations.
The chat built into AI Driller where users ask questions about their wells, summarize operations and generate programs and plans.
AI Driller's web platform for operators, streaming real-time data with alerts, roadmaps, engineering, reporting and cost tracking.
AI Driller's desktop suite for directional drilling companies. Free license available.
AI Driller's tool and equipment management for drilling, completions, production and workover.
The speed at which drilling fluid travels up the annulus between the drill string and the wellbore wall. A key check on whether cuttings are carried out of the hole.
AV (ft/min) = 24.51 × Q ÷ (Dh² − Dp²)
The space between the drill string or tubing and the wellbore wall or casing, through which fluid returns to surface.
Planning and monitoring that keeps a wellbore at a safe separation from nearby wells, using position-uncertainty ellipses and separation factors.
Methods that add energy to bring fluid to surface when reservoir pressure is not enough, such as rod pumps, ESPs and gas lift.
The approved budget for drilling, completing or working over a well, used to track planned against actual cost.
The compass direction of the wellbore at a survey station, in degrees from north.
How a given BHA tends to build, drop or turn the well while rotating, measured from surveys and used to plan slides.
Axial vibration in which the bit repeatedly lifts off and strikes the formation, damaging bits and BHA components.
The pressure drop, horsepower and jet velocity delivered at the bit nozzles, which clean the bit face and the bottom of the hole.
ΔP = MW × Q² ÷ (12,031 × TFA²)
The lower part of the drill string: bit, mud motor or rotary steerable, MWD tools, stabilizers and drill collars. Its design controls how the well builds, drops or holds angle.
AI Driller's own connector for bringing data into the platform where a direct integration isn't available.
Comparison of approved budget or AFE against actual spend, by phase, in AI Driller.
The fraction of a string's air weight that remains when it hangs in drilling fluid.
BF = 1 − MW ÷ 65.5
Large-diameter steel pipe run into the hole and cemented to protect the wellbore, isolate zones and support pressure control.
A group of perforations shot together within a frac stage.
A continuous reel of steel tubing run into the well for drillouts, cleanouts and interventions without connections.
The operator's representative on location who supervises rig operations and service companies. Also called the wellsite leader or drilling supervisor.
Landmark's Engineer's Data Model database format for well plans, surveys and designs. AI Driller imports and exports EDM projects.
The time to add a stand or joint of pipe to the drill string, from slips set to back on bottom. A common efficiency KPI.
The build section that turns a well from vertical to horizontal, ending at the landing point.
The daily operations report for a well, built in AI Driller from activities, real-time data, personnel and costs.
The specialist who steers the well along its planned trajectory, deciding when to slide and rotate.
The rate of change of wellbore direction between two surveys, combining inclination and azimuth change, in degrees per 100 ft.
DLS = DL × 100 ÷ ΔMD
The guaranteed minimum inside diameter of a pipe. A tool must be smaller than the drift to pass through.
Seamless steel pipe with threaded tool joints that makes up most of the drill string and transmits rotation, weight and fluid to the bit.
The document that sets out how a well will be drilled: hole sections, casing, BHAs, mud, parameters and procedures. AI Driller can generate and share programs.
A depth-based plan of target drilling parameters and instructions for each section, followed by the crew and tracked in real time.
Milling out the frac plugs after stimulation, usually with coiled tubing or a workover rig, to open the wellbore for production.
A bench test of a mud motor on a dynamometer to measure torque, speed and differential pressure before and after a run.
A downhole multistage centrifugal pump driven by an electric motor, used for high-rate artificial lift.
The zone around each survey point within which the true wellbore position lies, based on the survey tool's error model.
The effective density of drilling fluid while circulating: static mud weight plus annular friction pressure.
ECD = MW + APL ÷ (0.052 × TVD)
Operations to recover equipment left or broken in the hole, such as after a twist-off. Fishing jobs are a major source of NPT.
The pressure of fluids in the rock pores. Wellbore pressure must stay above it to prevent a kick.
The pumps, blenders, data van and equipment that perform hydraulic fracturing on location.
One isolated interval of the lateral that is fractured at a time.
The pressure gradient at which the formation fractures. ECD must stay below it to avoid losses.
The deepest point at which stuck pipe is still free, estimated from stretch under pull.
L = 735,294 × e × W ÷ F
The coefficient used in torque & drag models to represent friction between the string and the wellbore. Calibrated from actual hook loads and torque.
Artificial lift by injecting gas into the tubing to lighten the fluid column.
Produced gas divided by produced oil, in scf/bbl.
Adjusting the well path in real time from geological and logging data to keep the wellbore inside the target zone.
A lease or unit boundary the wellbore must not cross, often with a regulatory setback.
AI Driller analysis that flags likely drilling hazards ahead of the bit from offset and real-time data.
Removing drilled cuttings from the wellbore. Poor hole cleaning raises torque & drag and the risk of stuck pipe.
The weight measured at the hook, equal to the buoyed string weight adjusted for friction. Changes in hook load give WOB and flag drag.
Pumping fluid and proppant at high pressure to create and prop open fractures in the reservoir rock.
Calculation of pressures and flow throughout the circulating system: surface equipment, string, bit and annulus.
The pressure of a static fluid column at a given TVD.
P = 0.052 × MW × TVD
The angle of the wellbore from vertical at a survey station, in degrees.
Formation fluid entering the wellbore. An uncontrolled influx is a kick.
The surface pressure immediately after pumping stops at the end of a stage, with friction removed. Used to estimate fracture gradient and compare stages.
FG = (ISIP + 0.052 × ρ × TVD) ÷ TVD
The stage-by-stage summary of a frac job: volumes, rates, pressures, proppant and ISIP.
Time lost when operations run slower than the best demonstrated performance, even though nothing has gone wrong. Not recorded as NPT, so easy to miss.
A unit of work on a well, such as a drilling, frac or workover job, with its own phases, crew, tools and costs.
An unplanned influx of formation fluid into the wellbore when formation pressure exceeds wellbore pressure.
The depth where the well starts to deviate from vertical.
Fluid of the density needed to hold reservoir pressure while working on a well.
The mud weight needed to balance formation pressure after a kick.
KMW = MW + SIDPP ÷ (0.052 × TVD)
The point where the curve reaches horizontal in the target zone and the lateral begins.
The horizontal section of a well, drilled through the target formation.
A pressure test below the casing shoe to find the pressure at which the formation starts to take fluid.
A frac design that uses high perforation friction to spread fluid evenly across clusters.
Downhole tools that measure formation properties such as gamma ray and resistivity while drilling.
Maximum allowable annular surface pressure: the highest casing pressure before the shoe fractures.
MAASP = (LOT EMW − MW) × 0.052 × Shoe TVD
The length of the wellbore measured along its path from surface.
Downhole tools that send survey and drilling data to surface while drilling, usually by mud-pulse telemetry.
The energy needed to remove a unit volume of rock, from WOB, torque, RPM, ROP and bit size. Rising MSE points to inefficient drilling or dysfunction.
MSE = 4·WOB ÷ (π·D²) + 480·T·RPM ÷ (D²·ROP)
The industry-standard method for calculating wellbore position between surveys by fitting a smooth arc.
An open standard that lets AI assistants connect to external data and tools. AI Driller data is available over MCP.
The dogleg a mud motor actually produces per 100 ft of sliding, compared with its expected build rate.
A lightweight publish/subscribe messaging protocol widely used for streaming sensor and equipment data.
A positive displacement motor in the BHA that converts fluid flow into bit rotation. A bent housing lets it steer the well when sliding.
The density of drilling fluid, usually in pounds per gallon (ppg). It provides hydrostatic pressure to control formation pressure.
Time when planned operations stop because of an unplanned event, such as equipment failure, stuck pipe, well control or waiting on materials.
A previously drilled nearby well whose data is used to plan and benchmark a new well.
Companies that provide equipment and crews to operators: directional drilling, mud, frac, wireline, workover, well service and others.
A single surface location from which several wells are drilled.
A hole shot through casing and cement into the formation so fluid can flow between reservoir and wellbore.
A section of a job, such as surface, intermediate or lateral, used to group time, cost and plan-vs-actual tracking.
The measured, numbered list of every joint of pipe or casing run in the hole, used to calculate depth.
The volume of fluid in the active mud pits. An unexplained gain is a primary kick indicator.
Comparison of planned days, depth and cost against what actually happened, by phase.
The common completion method of setting a plug and perforating the next stage on wireline before each frac stage.
Proppant concentration: pounds of proppant per gallon of clean fluid.
Production rate per psi of drawdown, a measure of well deliverability.
PI = Q ÷ (Pres − Pwf)
An estimate of where the bit is now, or will be, ahead of the last survey.
Sand or ceramic particles carried into fractures to hold them open.
An open-source message broker used to move data reliably between systems.
How fast the bit deepens the wellbore, typically in feet per hour.
A remote center where engineers monitor many rigs and fleets in real time. Also called a ROC.
A sucker-rod beam pump that lifts fluid with a reciprocating plunger. The most common artificial lift method onshore.
When proppant bridges and blocks flow during a frac, causing a rapid pressure rise and early end of the stage.
The ratio of the distance between two wells to their combined position uncertainty. Values below set thresholds trigger anti-collision rules.
The drillpipe pressure after the well is shut in on a kick, used to calculate formation pressure and kill mud weight.
Drilling with a mud motor while the string is not rotated, so the bent housing steers the well in the chosen toolface direction.
The record of each slide and rotation interval with depth, toolface, ROP and parameters, used for directional reporting.
The start of drilling a new well.
Torsional vibration in which the bit slows or stops and then spins far faster than surface RPM, damaging bits and downhole tools.
When the drill string cannot be moved up, down or rotated. Causes include differential sticking, pack-off and wellbore geometry.
The pressure increase (surge) when pipe is run into the hole and decrease (swab) when it is pulled out. Too much surge can fracture the formation; too much swab can cause a kick.
A measurement of inclination and azimuth at a measured depth, used to calculate the wellbore position.
The authoritative database for well and operations data, such as WellView, OpenWells or WellEZ.
The planned line through the target formation that the lateral is steered along.
Disassembly and inspection of a tool such as a mud motor after a run, to record wear and failures before it is rebuilt.
The activity-by-activity time log for a job, combining manual entries with real-time data.
The direction the bent housing or steering tool points around the wellbore, which sets the direction the well turns while sliding.
Rotational torque and axial drag from friction between the string and wellbore. Modeled to plan strings and casing runs, and monitored in real time to flag poor hole cleaning.
Pulling the drill string out of the hole or running it back in, for example to change a bit or BHA.
The vertical distance from surface to a point in the wellbore, regardless of the path taken. Used for all pressure calculations.
The pipe inside the casing through which the well produces.
A failure in which the drill string parts downhole, often after a washout grows into a crack. Usually leads to a fishing job.
A service company's field ticket for work or materials, tied to the job and its budget.
Horizontal displacement of the wellbore projected onto a chosen direction, plotted against TVD on a section view.
A leak in the drill string, usually a crack or eroded connection, that lets fluid escape. Shows as a gradual pump pressure drop.
Produced water as a percentage of total liquid.
The downward force on the bit, taken from the change in hook load. A primary drilling parameter alongside RPM and flow rate.
The wellbore configuration in AI Driller: hole sections, casing strings and planned trajectory.
A smaller rig used for workovers, pulling rods and tubing, and other well maintenance.
An individual drilled path from surface or a parent bore. One well can have several wellbores, such as sidetracks or laterals.
Lateral vibration in which the bit or BHA moves off-center around the hole, causing uneven wear and damage.
Electric cable used to run perforating guns, plugs and logging tools into the well.
Wellsite Information Transfer Specification: an older serial data standard for rig sensor data, still common at the wellsite.
The Energistics data standard for exchanging real-time and historical wellsite data between rigs, service companies and operators.
Any major intervention on an existing well, such as replacing tubing, repairing equipment, recompleting or stimulating, to restore or increase production.